Olympus EVIS X1 Installation Manual page 23

External image record setting
◆ Record external images
When recording external images, the followings are two ways to set up.
1 Record the external image simultaneously with the recording of the
endoscopic observation image.
*The exam and external images are stored at the same time as the release.
2 Record only external images
*Only external images are recorded.
The following is how to set up.
1 Record the external image simultaneously with the recording of the
endoscopic observation image.
*Assign the optional Remote Switch Custom Button Release 1 or Release 2.
It can be operated from the touch panel of CV-1500 without assigning it to the Remote Switch /
Custom Button.
Setting > User setting > Release/Pre-freeze > Record ext. source
Setting > User setting > Release/Pre-freeze > Input terminal for external
source
* Select the terminal that used to input the external image to CV-1500. (HD/SD input (SDI)
or Y/C input)
2 Record only external images
* Assign an optional Remote Switch / Custom Button to External Imaging Releases.
You can operate from the touch panel of CV-1500 without assigning it to the Remote Switch
Custom Button.
Setting > User setting > Release/Prefreeze > Input terminal for external
source
*Select the terminal that inputs the external image to CV-1500. (HD/SD input (SDI) or Y/C input)
Please refer to "10. Appendix: save images per user settting" for differences in
stored images according to settings.
Step
Step
Setting
Default
Parameter
ON
HD/SD input (SDI)
Default
parameter
HD/SD input (SDI)
ON
*
Setting
*
23