Table of Contents
Advertisement
s
and lower voltage
values
Analogue in upper
and lower voltage
AI.U2
values
Analogue in upper
and lower input vari-
AI.V1
ables
Analogue in upper
and lower input vari-
AI.V2
ables
Save
SAVE
Escape
ESC
** Only available with ATD function
NOTE !
Ao1 and Ao2 stand for Analogue Output 1 and Analogue Output 2
Do1 and Do2 stand for Switching Output 1 and Switching Output 2
Ain stands for Analogue Input
General Functions (configuration layer:
Parameter Function
Green status LED
LED.G
Assign Interface
TERM.
Automatic tempera-
A.STR.
ture data output
Cycle for automatic
temp. data output
A.CYC.
Device address
ADDR.
Display panel
DISP.
temperature scale
UNIT
SAVE
Save
ESC
Escape
Operating Manual MPA
1 (0 - 10V)
Define lower limit of voltage span for input voltage
2 (0 - 10V)
Input variable 1 (example 0% for emissivity)
Input variable 2 (example 100% for emissivity)
Save changes / exit menu
Discard changes / exit menu
C011
)
Explanation
LED indicates 24V
ON
LED indicates digital output 1
DO1
LED indicates digital output 2
DO2
LED indicates running measurement in
TAC1
mode for ADT function
non-terminal mode
OFF
terminal mode at USB interface
USB
Terminal mode at RS485 (Halbduplex)
R485
automatic temp. data output is off.
OFF
temp. data output at PC terminal
ON
Select cycle time in s
Enter address of device for non-terminal mode
the display panel indicates "on"
"ON"
indicate temperature of source Ao1
IA1
degrees Celsius
°(
degrees Fahrenheit
°F
Save changes / exit menu
Discard changes / exit menu
32
Advertisement
Table of Contents
