ZyXEL Communications Prestige 2000W Quick Start Manual page 7

3.1.2 WEP Encryption
WEP (Wired Equivalent Privacy) encryption scrambles all communication transmitted between the Prestige
and the AP to keep network communications private. Do the following if you were given a WEP key to use,
otherwise skip to Section 3.1.3 on page
1 Use the up or down arrow and the Left key to select WEP Select.
2 Select the same length of WEP keys as the AP (64-bit or 128-bit).
3 Select a WEP key to configure.
4 The WEP key must be the same as on the AP. Use the left arrow button to clear
the default text. Use the up and down arrows to select the type of characters.
Enter the WEP key. Use the Left key to select Ok when you are done.
If you chose 64-bit WEP, then enter 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
5 You can configure up to four WEP keys (in the same manner as the first) but
only one key can be selected (enabled) at any one time.
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560
Prestige 2000W Quick Start Guide
8.
7
6. WEP Select
7. Profiles
8. Auth Type
Select Back
[1] None
[2] 64bit
[3] 128bit
Select Back
7. WEP key 1
8. WEP key 2
9. WEP key 3
Select Back
WEP key 1
**********
Ok Aa1@ Clear
8. WEP key 2
9. WEP key 3
10. WEP key 4
Select Back