ZyXEL Communications Prestige 2000W Quick Start Manual page 14

Configure the Prestige to use an outbound proxy server if your LAN is behind a NAT router that does not
support SIP. If your voice service provider gave you an outbound proxy server address and port, then enter
them here.
1 Select Outbound Proxy.
2 Select Proxy IP.
3 Use the left arrow button to clear the default text. Use the up and down arrows
to select the type of characters. Enter the outbound proxy server's IP address
or domain name. Use the Left key to select Ok when you are done.
4 Select Port.
5 Clear the port and enter the SIP outbound proxy server's listening port number.
Leave the default port number if you were not given one to use.
3.3.3 Proxy Server
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560
Prestige 2000W Quick Start Guide
14
2. OutboundProxy
3. Proxy Server
4. User Account
Select Back
1. Proxy IP
2. Port
Select Back
Proxy IP
sip.proxy.net
Ok Aa1@ Clear
2. Port
1. Proxy IP
Select Back
Port
5061
Ok Aa1@ Clear