Table of Contents
Advertisement
MMS profile
These settings are needed to use the picture messages function. The set-
tings for picture messages is supplied by your service provider and can
be sent to you automatically.
1.
From MMS settings, select MMS profile.
2.
Select your service provider and press Options
Add new MMS profile
Follow the steps below if your service provider is not in the list. Contact
your service provider for correct settings.
1.
From MMS profile, select Add:
•
Account name to add account name.
•
APN to add APN (Access Point Name).
•
User name to add user name.
•
Password to add password.
•
Homepage to add homepage.
•
Connection type use the buttons * and # to select connec-
tion enter HTTP or WAP.
•
Proxy address to add proxy address.
•
Proxy port to add proxy port.
•
Proxy user name to add proxy user name.
•
Proxy password to add proxy password.
2.
Press OK to confirm.
3.
Press Yes to save or No to exit without saving.
4.
Select your new profile and press Options
5.
Press OK to confirm. Press
To edit or delete an existing entry, select it and press Options
Delete.
Note! Some service providers require you to send a picture message
before you will be able to receive one. Send a picture message with text
only to activate the service. Some service providers require that you
contact them before enabling picture message for your account. Contact
your service provider's Customer Service.
English
during setup to exit without saving.
31
Activate.
Activate.
Edit or
Advertisement
Table of Contents
