Table of Contents
Advertisement
3.
Press Options
the number.
Alternatively, press
4.
Press Abort or
Receive a call
1.
Open the flip and press
Alternatively press Silent to switch off the ringsignal
or press
2.
Press
To answer an incoming call by opening the flip, see Answer mode, p.13.
Tip: Press and hold +/– to temporarily switch off the ringsignal without
opening the flip.
Volume control
During a call
•
Use the side buttons +/– or
The volume level is indicated on the display.
If you use a hearing aid or have hearing difficulties when using the tele-
phone in a noisy environment, you can adjust the phone's audio settings,
see Audio setup
Silent
Silent is a fixed profile with Keypad tone, Message tone and Ringtone dis-
abled, while Vibration, Tasks, Daily reminder and Alarm are unchanged.
•
Press and hold shortcut button # to activate or deactivate silent
mode.
Headset
When a headset is connected, the internal microphone in the phone is
automatically disconnected. If available, use the answer key on the head-
set to answer and end calls.
CAUTION
Using a headset at high volume may damage your hearing. Adjust the
volume level carefully when using a headset.
Call to dial the selected entry. If needed, select
to dial.
to cancel the call.
/close the flip to reject directly (busy signal).
to end the call.
, p.42.
English
to answer.
/
to adjust the sound volume.
11
Advertisement
Table of Contents
