Zenith XBR411 Manual page 145

DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
Base Tension
(Fig. A-9-1)
(A)
34. Base Tension (Fig. A-9-1)
1) Release the (A) part of the base tension from the
embossing of chassis.
2) Hold the base tension upward while turning it anti-clock-
wise.
(B) (C)
Chassis
(D)
Fig. A-9
35. Arm assembly Idler Jog (Fig. A-9-2)
1) Push both (B), (C) parts in Fig. A-9-2 toward the arrow
direction.
2) Disassemble the arm assembly idler upward.
CAUTIONS
Take care to ensure that the (D) part in the drawing is not
hung to chassis in disassembly.
4-11
Arm Assembly Idler Jog
(Fig. A-9-2)