Zibro S 32 Series Installation Manual page 98

Fig. 23
CAUTION
Connect the cable to the outdoor unit (for S 32xx models)
(see fig. 24)
1. Remove the electric parts cover from the outdoor unit.
2. Connect the connective cables to the terminals as identified with their respective matched numbers on
the terminal block of indoor and outdoor units.
3. To prevent the ingress of water, form a loop of the connective cable as illustrated in the installation dia-
gram of indoor and outdoor units.
4. Insulate unused cords (conductors) with PVC-tape. Make sure they do not touch any electrical or metal
parts.
4
98
L
L N S
N S