Tips And Tricks; Maintenance And Cleaning; Disposal; Disposing Of The Batteries - Parkside PHKS 1350 C2 Translation Of The Original Instructions

Material
Cross cuts & longitudinal cuts in
hard and soft wood (solid wood)
Chipboard, fibre board
Core board, plywood
Coated and veneered boards
PVC sheets
Acrylic glass sheets, perspex
Aluminium plate
Aluminium profile
Plaster board
Stone wool board
Cement-bonded particle board

Tips and tricks

■ Avoid damaging the cutting edge of sensitive
materials, e.g. coated chipboards or doors, by
sticking masking tape along the cutting line.
Another benefit of this is that it is easier to mark
a line on the tape than on a shiny surface. An
even more effective method of protecting the
cutting edges is to clamp a thin piece of wood
along the cutting line (this wood is also sawn).
│ GB │ MT
■ 38

Maintenance and Cleaning

Rotational
speed
setting
6
6
■ The appliance must always be kept clean, dry
6 and free from oil or grease.
■ To clean the casing, use a soft dry cloth.
6
3–5
WARNING!
2-4 ■ If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
4-6
or his representative in order to avoid safety
4-6
hazards.
1-2

Disposal

1-2
1-2
European Directive 2012/19/EU requires that worn-
out power tools are collected separately and fed
into an environmentally compatible recycling
process.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.

Disposing of the batteries

Battery users are obliged by law to take all
rechargeable and single-use batteries to a collection
point operated by a public authority or a retailer.
The purpose of this obligation is to ensure that
batteries are disposed of in an environmentally
congruent manner. Only dispose of batteries when
they are fully discharged. Batteries must be removed
from the device prior to disposal.
WARNING! RISK OF INJURY!
Switch the appliance off and remove
the power plug before starting any
work.
The packaging consists of environmentally
friendly material. It can be disposed of in
the local recycling containers.
Do not dispose of power tools in
your normal domestic waste!
Batteries must be recycled in accordance
with Directive 2006/66/EC and must not
be disposed of with household refuse.
PHKS 1350 C2