Connect The Phone To A Computer - Doro 2880 Manual

• M: To use your hearing aid in this mode, make sure that your hearing
aid is set to "M-mode" or acoustic coupling mode, and position the
phones receiver near the hearing aid's built-in microphone. For the
best results, try using the phone in different positions relative to your
hearing aid—for example, placing the receiver slightly above the ear
may result in better performance for hearing aids with microphones
positioned behind the ear.
• T: To use your hearing aid in this mode, make sure that your hearing
aid is set to "T-mode" or telecoil coupling mode (not all hearing aids
have this mode). For the best results, try using the phone in different
positions relative to your hearing aid—for example, placing the re-
ceiver slightly below or in front of the ear may result in better
performance.
See also Audio setup , p.44 on how you can adjust the audio settings.

Connect the phone to a computer

Connect the phone to a computer to transfer pictures, music and other file
types. Start by connecting a USB cable between the phone and computer.
From your computer's file explorer, you can drag and drop content be-
tween your phone and the computer.
Note! You might not be able to transfer some copyright protected material.
Drag and drop content between phone and a computer
1. Connect your phone to a computer using a USB cable.
2. Wait until the phone or memory card appears as external disks in the
file explorer.
3. Drag and drop selected files between the phone and the computer.
Note! You can transfer files using a USB cable on most devices and
operating systems supporting a USB Mass Storage interface.
Disconnect the USB cable safely
1. Make sure to enable the hardware to be safely removed.
2. Disconnect the USB cable.
Note! Computer instructions may vary depending on your operating
system. See the documentation of your computer's operating system for
more information.
English
12