Breville BRITA HotCup Manual page 7

DESCALING
To maintain its performance, your HotCup
every three months or so. You may need to descale your HotCup
frequently if you live in a hard water area.
By changing the MAXTRA+ cartridge more frequently, you will need to descale less
®
often. BRITA ® recommends to exchange the MAXTRA+
1. Completely remove the lid and remove the filter funnel and filter. Fill your HotCup
water dispenser to the MAX marking on the water chamber and place an empty cup
on the drip tray. Replace the lid. Select a suitable setting for the dispensing control
and press the start button. Wait for the water to be dispensed into the cup.
2. Add a citric acid-based proprietary descaling product to the hot water in the cup and
stir.
3. Tip the contents of the cup into your HotCup
4. Place the empty cup on the drip tray and press the start button.
5. Wait for the water to be dispensed into the cup.
6. Discard the water from the cup.
7. Repeat steps 4, 5 and 6 until your HotCup
HotCup water dispenser with fresh water to the MAX fill level and place an empty
™
cup on the drip tray.
8. Press the start button and wait for the water to be dispensed into the cup.
9. Discard the water in the cup.
10. Repeat steps 8 and 9 until your HotCup
any remaining descaling solution from your HotCup
11. When your HotCup water dispenser is completely cleaned, reinsert the filter funnel
™
and filter. Your HotCup water dispenser is ready for use again.
™
12
VKJ367_22EM1 (UK).indd 12-13 VKJ367_22EM1 (UK).indd 12-13
water dispenser will require descaling once
™
™ water dispenser more
® cartridge every 4 weeks.
water dispenser and close the lid.
™
water dispenser is empty. Fill your
™
water dispenser is empty. This will rinse
™
water dispenser.
™
™
13
3/3/2022 2:44:43 PM 3/3/2022 2:44:43 PM