Table of Contents
Advertisement
This function will be disabled if the HDR function is enabled and the
ProArt Preset setting is set to Standard, Rec 709, DCI-P3, Rec 2020, or
DICOM.
•
Proximity Sensor: If the function is enabled and the system does not
detect the presence of object within 30cm-1.5m over the preset time, the
system will automatically decrease brightness periodically.
•
•
•
•
Screen Protection: Ensure the life cycle of panel by decreasing brightness
gradually.
This function will be disabled if the ProArt Preset setting is set to
HDR_PQ DCI, HDR_PQ Rec2020, HDR_HLG BT2100, or HDR_HLG
DCI.
•
Information: Shows the monitor information.
•
All Reset: Selects "Yes" to revert all settings to the factory default mode.
ASUS PA27DCE OLED Monitor
Recovery time would be within 2 seconds.
Detectable ability and distance are different according to the object
and environment.
Please avoid placing objects in front of the sensor (between 30
cm and 1.5 m), as it will cause the function of the sensor to fail
(misjudging that someone is ahead).
3-13
Advertisement
Table of Contents
