Wireless - Mac Filter; Wireless - Bridge - D-Link DSL-2600U User Manual

Web Configuration
AES encryption mode means AP auto adjust to use TKIP or AES according to
wireless clients.
Click Save/Apply to save the wireless security options and make the modification effect.

Wireless - MAC Filter

The web page allows you to create a list of MAC addresses that are banned or allowed
association with the wireless access point.
= MAC Restrict Mode: The function can be turn on/off, Check Disabled to disable
this function. Vice versa, to enable the function. After enabling the function, you can
filter wireless users according to their MAC address, either allowing or denying access.
Check Allow to make any wireless MAC address in the Wireless Access Control List
can be linked to. And Check Deny to banned any wireless MAC address in the
Wireless Access Control List to be linked to.
= Add a MAC Access Control: To add a new MAC address to your wireless MAC
address filters, click Add to show next page. Type in the MAC Address in the entry
field provided. Click Save/Apply to add the MAC address to the list. The MAC
address appears listed in the table below.
= Remove a MAC Access Control: Select the Remove checkbox in the right column
of the list for the MAC address to be removed and click Remove.
Wireless – Bridge
This page allows you to configure wireless bridge features of the wireless LAN interface.
The Wireless Distribution System (WDS) allows you to extend the range of your wireless network by introducing one or more WDS-enabled devices into your wireless
network. You can only establish WDS links with WDS-enabled devices.
D-Link DSL-2600U User Manual
69