Craftsman 28948 Operator's Manual page 11

\
Rear Lift Link(S)
Right Side Rear Mower Bracket
Hole
8 Attach front link (E)
, Turn steering wheel to position wheels
straight forward,
• From front of tractor, insert rod end of
front link (E) through front hole in tractor
front suspension bracket (F).
• Move to left side of mower and and insert
large retainer spring (G) through hole in
front link (E) behind front suspension
bracket (F).
• Insert other end of link (E) into hole in
front mower bracket (H) and secure with
washer and small retainer spring (J),
NOTE: Requires deck lifting°
Front Link
Location
9 Install Belt On Engine Clutch Pulley (M)
, Disengage belt tension rod (K) from
locking bracket (L),
• install beltonto engine clutch pulley (M),
IMPORTANT: Check belt for proper rout-
ing in all mower pulley grooves and under
mandrel covers,
M,Engine
Clutch Pulley
• Engage belt tension rod (K) on locking
bracket (L),
_CAUTION: Belt tension rod is spring
loaded, Have a tight grip on rod and
engage slowly.
Raise attachment lift lever to highest
position.
If necessary, adjust gauge wheels before
operating mower as shown in the owner's/
operator's manual Check gaugewheels,
deck level and rake settings.
Eo Front Lift Link Assembly
R Front Suspension Bracket
G. Large Retainer Spring
H o Front Mower Bracket
J. Small Retainer Spring
M, Engine Clutch Pulley
/
tl