Table of Contents
Advertisement
9.11 Départ Différé
With this option you can delay the start of a
programme in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by steps
of 30 minutes up to 90' and from 2 hours up
to 20 h.
After touching the Départ/Pause button, the
display shows the indicator
10. SETTINGS
10.1 Acoustic signals
To deactivate the acoustic signals when the
programme is completed touch the Anti-
allergie and the Rinçage Plus buttons
simultaneously for about 3 seconds.
The acoustic signals, they continue
operate when the appliance has a
malfunction.
10.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option, touch
the Taches/Prélavage and the Rinçage
Plus buttons simultaneously until the
indicator
comes on/goes off on the
display.
You can activate this option:
• After you touch the Départ/Pause button:
all the buttons and the programme dial are
deactivated (except Marche/Arrêt button ).
• Before you touch the Départ/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
10.3 Douceur Plus
Set the Douceur Plus option to optimise the
fabric softener distribution and improve the
fabric softness.
It is suggested when you use the fabric
softener.
20
ENGLISH
selected delay time and the appliance begins
the countdown.
9.12 Départ/Pause
Touch the Départ/Pause button to start,
pause the appliance or interrupt a running
programme.
and the
This option increases slightly the
programme duration.
To activate/deactivate this option touch the
Température button and the Essorage button
simultaneously until the
on/goes off above the
10.4 Permanent Extra Rinse
With this option you can permanently have an
extra rinse when you set a programme where
it is selectable.
• To activate/deactivate this option touch
10.5 Operating Hours Counter
It is possible to visualise the total operating
time of the appliance in hours, starting from
the first switching on. This value will count
operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by pressing
2. Turn the programme knob to the Eco
3. Press and hold the Anti-allergie and
the Option button and the Rinçage Plus
button simultaneously the relevant
indicator comes on/goes off.
This option adds two rinses and the
display shows
.
Marche/Arrêt button.
40-60 programme (1st position
clockwise).
Rinçage Plus buttons for some seconds
(within 10 seconds after the switching on.
indicator comes
indicator.
Advertisement
Table of Contents
