Westinghouse WFEP9757DD User Manual page 26

USING YOUR INDUCTION HOB (CONTINUED)
Pause
This function sets all cooking zones that operate to the
lowest heat setting.
Press to activate the function. The heat setting is
lowered to 1.
To deactivate the function: press . The previous heat
setting comes on.
Lock
You can lock the control panel while the hob operates.
It prevents an accidental change of the heat setting.
Set the heat setting first.
To activate the function: press
To deactivate the function: press
The function deactivates as you deactivate the
hob.
Child Safety Device
This function prevents an accidental operation of the
hob.
To activate the function: press
setting. Press and hold
indicator above the symbol appears. Deactivate the hob
with .
The function stays active when you deactivate
the hob. The indicator above
To deactivate the function: press
heat setting. Press and hold
indicator above the symbol disappears. Deactivate the
hob with .
Cooking with the function activated: press
press for 3 seconds, until the indicator above the
symbol disappears. You can operate the hob. When you
deactivate the hob with
26
USING yOUR INDUCTION hOB
.
again.
. Do not set any heat
for 3 seconds, until the
is on.
. Do not set any
for 3 seconds, until the
, then
the function operates again.
Bridge
The function operates when the pot covers the
centres of the two zones. For more information
on the correct placement of cookware refer to
"Using the cooking zones".
This function connects two cooking zones and they
operate as one.
First set the heat setting for one of the cooking zones.
To activate the function for left/right cooking zones:
touch / . To set or change the heat setting touch one
of the left/right control sensors.
To deactivate the function: touch
zones operate independently.
Hob²Hood
It is an advanced automatic function which connects
the hob to a special hood. Both the hob and the hood
have an infrared signal communicator. Speed of the fan
is defined automatically on basis of mode setting and
temperature of the hottest cookware on the hob. You
can also operate the fan from the hob manually.
For most of the hoods the remote system is
originally deactivated. Activate it before you use
the function. For more information refer to hood
user manual.
Operating the function automatically To operate the
function automatically set the automatic mode to
H1 – H6. The hob is originally set to H5. The hood reacts
whenever you operate the hob. The hob recognizes
temperature of the cookware automatically and adjusts
the speed of the fan.
/ . The cooking