3
Make sure the cables pass through the notch at the bottom of the rear
cover, and are not pinched.
Be sure to use the printer with the rear cover attached.
4
Insert the power plug of the AC cable into the wall socket.
Be sure to remove the AC cable from the wall socket whenever connecting or dis-
connecting the AC cable to the printer.
Failure to do so may result in damage to the AC adapter or the printer.
CAUTION
Make sure the wall socket power supply satisfies the rated voltage requirements
of the AC adapter. Never insert the AC cable into a socket that does not meet the
rated voltage requirements of the AC adapter.
Doing so may result in damage to both the AC adapter and the printer.
Chapter 2 Setup
2
41