KTM 500 EXC-F 2022 Owner's Manual page 146

18 SERVICE WORK ON THE ENGINE
144
Main work
–
Position an appropriate container under the engine.
–
Remove oil drain plug
H01703-10
–
Remove screw plug
rings.
Info
Do not remove screw
H01704-10
–
Remove screw plug
rings.
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surfaces.
H01705-10
–
Mount and tighten screw plug
the O-rings.
Guideline
Screw plug, oil
screen
H01706-10
–
Position long oil screen
–
Position the pin wrench through the drill hole of the screw plug
in the opposite section of the engine case.
–
Push the oil screen all the way into the engine case.
H01707-10
1
with the magnet and seal ring.
2
with the short oil screen and the O-
A
.
3 4
with the long oil screen
2
with the short oil screen and
M20x1.5 15 Nm (11.1 lbf ft)
4
with the O-rings on a pin wrench.
and the O-