Table of Contents
Advertisement
11 Operating the Saw
NOTICE
Engine power may drop noticeably when the chainsaw is
subsequently used at temperatures above –10°C.
► Carry out the standard setting.
► Rotate the low speed screw (L) a quarter turn
counterclockwise.
► If the saw chain runs continuously or the engine stops:
Adjust idle speed.
11.5 Adjusting Oil Feed Rate
The chainsaw has an adjustable oil pump.
2
1
The oil feed rate is suitable for most applications when the
oil pump adjusting screw (1) is in position E (Ematic).
0458-786-0121-A
L
A
The oil pump feed rate can be adjusted to suit different bar
lengths, wood species and working techniques. The range of
adjustment of the oil pump adjusting screw (1) is limited by
a stop (2). The stop (2) can be depressed in order to further
increase the oil feed rate.
To increase oil feed rate
► Turn the oil pump adjusting screw (1) clockwise.
To increase oil feed rate still further
► Use a suitable tool to depress the stop (2).
The stop (2) remains permanently depressed.
NOTICE
The oil tank will be drained at a faster rate if the oil pump
adjusting screw (1) is in the 'A' segment. The point where the
saw chain is no longer being lubricated properly will be
reached sooner.
► Fill the oil tank to maximum.
► Move the oil pump adjusting screw away from the 'A'
segment when the increased oil flow rate is no longer
required.
► Turn the oil pump adjusting screw (1) clockwise.
To reduce oil feed rate
► Turn the oil pump adjusting screw (1) counterclockwise.
11.6 Holding and Controlling the Chainsaw
English
27
Advertisement
Table of Contents
