Table of Contents
Advertisement
Basic settings
en
Indicator/
Function
symbol
Configuring air recirculation mode or air extraction mode
™‚ˆ
‹
Air recirculation mode has been set.*
‚
Air extraction mode has been set.
™‚‰
Configuring automatic start
‹
Switched off.
‚
Switched on: The ventilation system starts at a specified power level.*
Configuring the run-on
™ƒ‹
‹
Switched off.
‚
Switched on: The ventilation system runs in air extraction mode for approx. 6 minutes at power level
mode for approx. 30 minutes at power level
Restoring the factory settings
™‹
‹
Custom settings.*
‚
Restore the factory settings.
* Factory settings
**The hob's maximum power is shown on the rating plate.
To access the basic settings:
The hob must be off.
Switch on the hob.
1.
Within ten seconds, touch and hold the
2.
for approximately four seconds.
The first four displays provide product information.
Touch the settings area to view the individual
displays.
Product information
After-sales service index (ASSI)
Production number
Production number 1
Production number 2
Touching the
symbol again takes you to the basic
0
3.
settings.
and
flash alternately on the displays and
™
‚
appears as a presetting.
Touch the
symbol repeatedly until the required
0
4.
function is displayed.
22
‚
, and automatically switches off once this time has elapsed.*
5.
symbol
0
Display screen
‹‚
"š
Š†
.
6.
‹
.
†
The settings have been saved.
Leaving the basic settings
Turn off the hob with the main switch.
‹
Then select the required setting from the settings
area.
Touch the
symbol for at least four seconds.
0
„
and in air recirculation
Advertisement
Table of Contents
