Childproof Lock; Activating And Deactivating The Childproof Lock; Wipe Protection; Automatic Safety Cut-Out - Bosch PVS845F11E Instruction Manual

Induction hob with integrated ventilation system
Table of Contents

Advertisement

Childproof lock

en
AChildproof lock
Y ou can use the childproof lock to prevent children
C h i l d p r o o f l o c k
from switching on the hob.
Activating and deactivating the childproof
lock
The hob should be turned off.
To activate: press the symbol
4 seconds. The indicator next to the symbol
up for 10 seconds. The hob is locked.
To deactivate: press the symbol
4 seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically
activates when a hob is switched off.
Switching on and off
You can find out how to switch the automatic childproof
lock on in the ~ "Basic settings" section
kWipe protection
I f you wipe over the control panel while the hob is
W i p e p r o t e c t i o n
switched on, settings may be altered. To avoid doing
this, you can use the hob's "Lock control panel for
cleaning" function.
To switch on: Touch the
sounds. The control panel is locked for 35 seconds.
You can now wipe over the surface of the control panel
without altering any settings.
To deactivate: The control panel will be unlocked once
35 seconds have elapsed. To release the function early,
touch the
>
symbol.
Notes
An audible signal sounds 30 seconds after
activation. This indicates that the function is about to
finish.
The cleaning lock does not lock the main switch. The
hob can be switched off at any time.
20
D
for approximately
D
for approximately
D
symbol. An audible signal
>
bAutomatic safety cut-out
I f a hotplate operates for an extended period and no
A u t o m a t i c s a f e t y c u t - o u t
settings are changed, the automatic safety shut-off is
activated.
The hotplate stops heating.
indicator
When you touch any symbol, the display switches off.
The hotplate can now be set again.
The point at which the safety shut-off becomes active
lights
depends on which heat setting has been set (after 1 to
10 hours).
"
,
or
flash alternately in the hotplate display.
œ
and the residual heat

Advertisement

Table of Contents
loading

Table of Contents