Speed Queen AES17AWF User Manual page 7

• Do not overload your dryer. Bulk, not weight,
determines the load size. If the dryer is
overloaded, it could cause discoloration or
permanent heat damage to the load.
• There should be space in the dryer for the
clothes to tumble freely and help to reduce
wrinkles.
• Large and small pieces together make up
loads which will tumble well. Permanent press
loads should be smaller to provide room for
tumbling. Proper tumbling allows for fewer
wrinkles.
• A load can be too small. Just a few small
pieces will not tumble properly. They will take
longer to dry and they may be wrinkled. For
small loads, add a couple of large towels or
non lint shedding items to aid in tumbling.
• The following illustrations show the ideal load
sizes for fabrics. The average load will fill the
cylinder one third to half full when wet.

Cylinder with wet linens and cottons
Cylinder with wet permanent press items
-7-
512062
DRY2031N
DRY2031N
DRY2032N
DRY2032N
DRY2024N