FINAL INSTALLATION PROCEDURES
Reattaching the Indoor Unit Panels - HVT
Reattach the indoor unit front and bottom panel after all other installation procedures are complete.
1. If ON, shut power OFF to the system. If it hasn't already, reattach the control cover with its screw.
2. Reattach the bottom panel to the indoor unit, carefully aligning the panel using the rear tabs. Tap the panel gently to verify it engages at
the bottom.
3. Using a Phillips screwdriver, reattach the screws to the bottom panel.
4. After the screws are in place, re-snap the latches over the screws.
5. Shut the front panel. Tap the panel gently to verify it is fully shut.
Figure 86: Reattaching the Bottom Panel.
54
Figure 87: Reattaching the Screws on the
Bottom Panel.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
MULTI
MULTI
Figure 88: Reattaching the Screws on the Bottom
Panel.
F
F
MAX