Component Identification - Kärcher HDS 2.8/25 P Cage Operator's Manual

Discharge
Nipple
Collar
Trigger
High Pressure
Hose
Pump — Develops high pressure.
Starter Grip — (Not Shown) Used for starting the
engine manually.
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Detergent Injector — Allows you to siphon and mix
detergents.
6

COMPONENT IDENTIFICATION

Gasoline
Tank
Detergent
Injector
Quick
Coupler
Spray
Gun
Swivel
Connector
9.800-079.0 • Rev. 01/18
Pump
Control Wand
Handle
Variable Pressure Control Wand — Must be con-
nected to the spray gun. This wand handle controls
dishcharge flow from one tube to both wand tubes.
When water is discharged from both tubes you will have
a pressure loss and allows chemical siphoning when
used in combination with a detergent injector.
High Pressure Hose — Connect one end to water
pump discharge nipple and the other end to spray gun.
Note: If trigger on spray gun is released for more
than 2 minutes, water will leak from valve. Warm
water will discharge from pump protector onto
floor. This system prevents internal pump damage.
Pressure
Switch
Unloader
Water Supply
Hose
(not included)
Battery Box
Wand Coupler
Nozzle
Quick
Coupler
Brass
Soap
Variable Pressure
Nozzle
Control wand