Page 1
C332 CDMA 1X Digital Mobile Phone User Manual...
Page 2
ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.
The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your phone. Please subject to the real object. ZTE operates a policy of continuous development and reserves the right to update and modify the technical specifications in this document at any time without prior notice.
Set PIN code of the UIM card. Take it with you as you can. 1.3 Safety Warnings To the Owner Some electronic devices are susceptible to electromagnetic interference sent by mobile phone if inadequately shielded, such as electronic system of vehicles. Please consult the manufacturer on the device before using the phone if necessary.
Page 11
driving. Park before making or answering a call. Store the phone out of the reach of little children. The phone may cause injury if used as a toy. Mobile Phone Please use original accessories or accessories that are authorized by the manufacturer. Using any unauthorized accessories may affect your mobile phone’s performance, and violate related national regulations about telecom terminals, or even endanger your body...
Page 12
Do not connect the phone with other unauthorized peripheral equipments. Do not attempt to disassemble the mobile phone and battery by yourself. Non-expert handling of the devices may damage them. Do not charge the mobile phone without battery. On occasion of emergent calling, keep your phone in status of power on and in area of service.
Page 13
Battery Using Do not short-circuit the battery, as this can cause excessive heat and fire. Do not store battery in hot areas or dispose of it in a fire to avoid explosion. Never use any charger or battery damaged or worn out. Return the wear-out battery to the provider or put it in the appointed recycle place.
(c) Water or any other liquid damage. (d) Any unauthorized repair or modification. (e) Power surges, lightning damage, fire, flood or other events outside ZTE’s reasonable control. (f) Use of the product with any unauthorized third party...
1.5 Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using this product, whether or not ZTE had been...
Know Your Phone 2.1 Keypad Earpiece LCD screen Scroll key Right select key Left select key Send key End key 0~9 Number key Microphone Charger connector/Earphone Function Description Make or answer a call. Press Send key in standby mode to Send key enter all calls list.
Page 17
End an active call or reject a call. End key Power on/power off. Exit from any interface to standby mode. Left select key Enter main menu in standby mode. Switch to the options of left bottom submenu. Right select Enter Find menu in standby mode. Switch to the options of right bottom submenu.
Page 18
menu. Used as direction key in games. Scroll the cursor left and right. Used as selection key to scroll cursor left and right for keying in commands and selecting options Left/Right key shown on the display. (Scroll key) In standby mode, press Left key to enter MobileShop menu, press Right key to enter Games menu.
To “hold” the key means to keep pressing the key for two seconds or more. 2.2 Instruction of Interface Icon Icon Indication Signal strength Roaming New message Vibration Silence All Alarm Power indicator 2.3 Technical Parameters Handset Type ZTE C332 (Width×Height×Thickness) Dimensions 46mm×104mm×12.8mm Weight About 70g(Battery Included) Battery...
Continuous standby About 150h~220h (Subject to time Network) Continuous talk time About 2h~2.5h (Subject to Network) Note: Please refer to the real phone for other relative parameters of the battery and charger. 2.4 Battery The attached Li-ion battery along with the phone can be used after unpacking.
back-cover of the phone flatly upon the body of phone. Direct the back cover towards the locking catches on the both sides of the phone and push the back-cover of the phone upward to lock the cover into its place. 2.4.2 Charging the Battery Plug out rubber away (turn 180°...
Page 22
Meanwhile, the charging indicator in up-right corner of the display flops cyclically, indicating the charging is going. In power-off mode while charging, the display only shows the charge indicator. If the battery is completely flat in storage or used up, it may take for a while before the charging indicator appears on the display or any calls can be made.
environment and application methods. 2.5 Connecting to the Network 2.5.1 UIM Card Before using the phone, please insert effective UIM (User Identity Module) card into the phone. All the information related to the network connection is recorded in the metal plane area of UIM card together with the information you stored in your Contacts in the UIM card.
2.5.3 Power on/off Phone Press and hold End key to power on/off the phone.The phone will check whether UIM card inserted well or not. And then follow the prompt indication on the display: Enter PIN——Key in PIN code of UIM card if it is set. Searching——Search appropriate network connected.
2.5.5 Connecting the Network After powering on and inputting PIN code, the phone automatically searches the network available and in state of standby mode. Besides sending and receiving calls, you can also do: Press Left select key to enter main Menu. Press Right select key to enter Find menu.
Basic Operations 3.1 Making a Call Please ensure that you are in the place where the signal can be received. Examine network signal strength icon on the screen. The more the indication bars, the stronger the intensity of receiving signal is. If there is no bar, please move to the place where the intensity of receiving signal is better.
Page 27
key to call out. Before the country code, hold 0 key to enter the international prefix “+” (the character “+” replaces the international access code) or key in international prefix e.g. “00” of international call directly. Country code + Area code + Telephone number 0086 26770000 Making Recent Calls...
afterwards. Press Send key to dial the first number, when connected, press Send key again to dial the second number automatically. “P” can be used for not once only. 3.2 Answering a Call When a call is incoming in standby mode, the phone will offer corresponding ringer or vibration to prompt according to your settings.
will ring normally as next call coming. 3.3 In Conversation 3.3.1 Silence in Conversation During conversation, you can select Option (Names, Messages, Record) or Mute displayed. Select Mute to let the other party temporarily not hear your voice; Select Unmute back to normal. You can also enter Names, Messages or Record during a conversation.
Page 30
Up/Down or Left/Right key through the menu and select functions according to the prompt on the screen. If the menu contains submenus and further submenus, select options and submenu you want according to the prompt on the screen. iii. Press OK key/Left select key or Right select key to set or return to the previous menu.
4 Names You can save contacts in phone and UIM card. Each contact in phone’s memory has three phone numbers. Select Memory Status to view memory of phone and UIM card. 4.1 Finding Records You can search for a name or number in Names in pop-up window by choosing: In All Contacts 1.
Find 1. Select Menu → Names→Find. 2. Select - Find Name: You can key in the first characters of the name you are searching for to view contact directly in All List. - Find Number: Key the phone number you are searching for to view contact directly in All List.
Page 33
Number/Mobile Number/Office Number and set Call Alert/Sms Alert of the contact. See “13. Text Input” more instructions for writing text and character. 5. After the completion of writing, press OK key/Left select key to save the contact. 6. Scroll to the just-added phone number to reedit, press OK key/Left select key.
3. Select UIM and press OK key to add Name/Number. See “13. Text Input” more instructions for writing text and character. 4. After the completion of writing, press OK key/Left select key to save the contact. 5. Scroll to the just-added phone number to reedit, press OK key or select Option.
Colleagues, School, Club and VIP. Scroll to the name you want, and press OK key to view the details or select Option. Note: When there is no storage record in Contacts, it will indicate “No item”. 4.4 Erasing Records 4.4.1 Erasing a Record 1.
4.5 Editing Records 1. Select Menu→ Names. 2. Select All List or Find to search for would-be edited record. 3. Scroll to the record you want to edit and press OK key 或者 Left select key. 4. Select Option to Edit name, press OK key/Left select key to confirm.
4.7 Viewing and Making Speed Dial Viewing: Select Menu→ Names→ Speed Dial to view all Speed Dial list. Dialing: You can make a call by entering speed dial number in the standby mode. Method 1: Enter speed dial number, press Send Key to dial. Method 2: Directly hold the Speed Dial Number digit key.
-Set Msg Tone: set the specific Msg tone of the group. -Edit Title: Rename the group. 4.9 Memory Status 1. Select Menu→ Names→ Memory Status. 2. View the number of saved entries and maximum number of entries saved in phone and UIM card. For example: phone: 8/500, UIM Card: 4/500, indicating that 500 records entries in Max., out of which eight have be saved in phone.
Messages This is introduction of how to send, receive and erase the messages in your phone. Note:The function introduced hereinafter may differ with different service offered in your area. Please consult with your service provider for more detailed information. 5.1 Sending a New Message Please consult with the service provider to support the network service of sending message.
Select Names in Option to select phone number from Names. Select SMS Groups in Option to select SMS group you have already set. - Save: Save the message in Draft. - Templates: Select preformatted phrases and sentences as message text. - Names: View the details of Names.
1.Select Menu→ Messages→ Inbox. 2. Scroll to the message you want to read. 3. Press OK key to read message. You also press Up/Down key to scroll. 4. After reading, selection Option to: -Reply:Reply message to sender. -Forward: Forward the message to other recipients. -Erase:Erase this message.
5.5 Reading Voice Mail Before using Voice Mail, please consult with network provider to confirm that the function of voice mail box has been activated. After your successful setting, network will automatically transfer divert incoming call(s) to your voice mail box, and send message(s) to your phone.
5.7 Setting Message Groups You can send messages to grouped mobile phone which can receive message meanwhile. 1. Select Menu→ Messages→ Msg Groups. 2. Select any SMS Groups (1-5) and add receiver into those groups. All the phone numbers displayed listed in pop-up window can be reedited.
3. Press Up/down key to select to-be-erased messages. 4. Select Erase to erase messages. “Delete?” appears. 5. Select OK to erase this message. 5.8.2 Erasing All Messages 1. Select Menu→ Messages→ Erase Msgs. 2. Select an option in list: - Inbox:Erase all messages in Inbox. - Outbox: Erase all messages in Outbox.
receive message from network informing you whether you have sent message successfully. 5.9.3 Save Sent Message Select Menu→ Messages→Msg Settings→Text Setting→ Save Sent Msg. 2. Select On or Off for your phone can or can not automatically save sent message. 5.9.4 Automatically Erasing Inbox Set erasing the last read message in Inbox automatically when Inbox is full.
Page 46
2. View the number of saved messges and maximum number of messages saved in Inbox, Outbox, Draft in Phone and in UIM card. For example: UIM Card: 4/500, Phone Inbox: 8/100, Phone Outbox: 4/100, Draft: 2/20, indicating that 500 records entries in Max., out of which eight have be saved in UIM card, 100 records entries in Max., out of which eight have been saved in Phone Inbox, 100 records entries in Max., out of which four have been saved in Phone Outbox, 20...
Call History 6.1 Viewing Recent Calls Information of Missed Calls, Received Calls, Dialed Calls, Call Duration, Erase History including name, phone number, and call time and conversation duration is saved in the Call History. 1. Select Menu→Call History. 2. Select Missed Calls, Received Calls, Dialed Calls. 3.
- Delete:Erase the number from the list of Call History. - Edit: Edit the number. - Black List:Add this number to the Black List. If the UIM Card does not support the function of Incoming Call Indication, you can only see part of the above-mentioned options. 6.2 Erasing Recent Calls List 1.
7 Profiles You can personalise your phone. There are many ways to change the sound and feel of your phone. You can Set, Profile Edit or Rename the current profile of Vibrate, Silent, General, outdoor, Meeting, Headset to Set, Edit or Rename the profile.
8 Display 8.1 Selecting Wallpaper 1. Select Menu→ Display→Language. 2. Press Up/Down Key to select Preset Wallpaper or Download Wallpaper. 3. Press Up/Down Key to scroll the list and press OK key/Left Select Key to confirm. 8.2 Setting Backlighting During a call or pressing keys, the display lights on. You can set lighting duration.
9 Settings In main Menu pop-up window, select Settings to enter into. Your phone has different functions in Settings to meet your requirement. They are: Call, Security, and Phone. 9.1 Call When network supports, you can use network services of call waiting and call forwarding.
1. Select Menu→ Settings→ Call → Call Waiting. 2. Select Option: - Enable: To activate the Call Waiting function. The network will notify you of an incoming call while you have a call in progress. You can press Send key to get through the waiting call and switch one call to another.
Continue to press OK key. If the number has been set, directly press OK key to select Enable. E.g. To forward incoming call to 12345678, input: 12345678, press OK key twice and confirm. Disable: To deactivate Call Forwarding function. Edit Featue Code: To edit the call forwarding number of To Enable and To Disable.
ZTEC332 has two solutions for international country code prefix, either for standard based area or for network where standard based solution is not implemented. 1. Select Menu→Settings→ Call→ International Call 2. Select option, Auto: “Do you want to activate this function?” display and press OK key to confirm.
9.1.8 Fire Proof You can set Incoming calls bar in Fire Proof submenu including Friend List, Black List, Current Settings. Friend List All the contacts will be listed by the letter of the name. 1. Select Menu→ Settings→Call →Fire Proof→Friend List. 2.
Bar All: Bar all incoming calls. Bar Black List: Only bar numbers listed in Black List. Bar All Except Friend List: Only numbers listed in Friend List are not blocked. Cancel All: Cancel barring setting. 9.2 Security Settings Introduction to phone’s security options preventing others to avoid illegal use or acquire your phone’s personal information.
9.3 Phone 9.3.1 Auto Key Guard 1. Select Menu→ Settings→ Phone→ Key Guard to set phones’ key lock and time. 2. Select an option in pop-up window: -Off:Deactivate the function of phones’ key lock. -30 S auto-guard:Phones’ key locked automatically 30 seconds after the last key pressing.
-Roaming: When roam in active and handoff between service areas or states occurs, alert. For the function mentioned above, select On to operate; select Off to cancel alert. 9.3.3 Version PRL Version: Shows present PRL (Personal Roaming List) version of phone. SW Version: Shows present software version of phone.
Organiser Extra offers two games: Hit Rat and Greedy Snake, as well as tools, such as, Alarm Clock, Calculator, Calendar, Stopwatch, and Radio. 10.1 Scheduler 1. Select Menu→Organiser→ Scheduler. 2. Press Left/Right key or Up/Down key to select exact date you want to view in pop-up calendar window.
10.2.1 Recording in Normal 1. Select Menu→Organiser→ Voice Memo. 2. Scroll Up/Down key to select: Record – When you are not in conversation, select Start to begin a new Recording, or Stop/ Pause recording. After Record ended, select Option to Review, Re-record or Save the file.
The record will be saved automatically when the call is ended without finishing recording, and exit back to interface of ending call. 10.2.3 Recording with Incoming Call/Message With Incoming Call While recording in state of non-conversation, receive a call will stop recording. The record of phone will be saved automatically and return to call interface.
2. Select Set alarm to set, and press OK key. Select Alarms List to view the settings. Select Set rest day to set the date of alarm. Select Delete all to delete all setting. 3. When alarm rings, select OFF to stop alarming or select Snooze to postpone alarming time.
Page 66
Multiply Sign Decimal Point Press Right Select key to erase digit one by one and exit to previous window, press Left Select key to erase all digits and reset, press End key to exit to standby mode. Note:This calculator has a limited accuracy and is designed for simple calculations.
11 Do More This function needs network support by service provider. If your UIM card can also support, menu of SMS Service or TATA zone appears on the display. If UIM Card and network provider don’t support, the function is invalid. The application of this function may ask for extra fee.
Games 12.1 Brick attack In this game, paddle the bar to rebound the ball and attack bricks with skill. And then enter next stage. 1. Select Menu→ Games→ Brick attack. 2. Press Left Select key or OK key, the display shows greeting and play guide.
Page 69
locations. And then enter next stage. 1. Select Menu→ Games→ Push Box. 2. Press OK key, the display shows greeting and play guide. 3.Select New Game to start,select Stage and key in stage level. Press OK key to start. 4. As passing a stage, select Replay to replay again, select Next to enter next stage.
Text Input Your phone offers text input modes: Multitap Input (Abc/ABC), Numbers Input (123), eHiText Input (eHi), and Symbol Input (Symbols). Input mode includes capital letter and lowercase mode. You can key in letters, digits, characters and symbols when writing text or editing contact record information in Names or Messages etc., following the common instruction in hereinafter table.
Erase Character Press Right select key Erase all the Hold Right select key till all the characters characters be erased. Move cursor left or right Press Left/Right key. Change input mode Press # key to select another text mode. Capitalization Press * key to switch between capitalization and lowercase.
appears on the screen. If the word displayed is not the word you want, press Up/Down key to look for another matching word. Then press OK key to confirm. 13.4 Symbols Input - Press 1 key to input till the symbol appears. Most common punctuation marks and special characters are available.
Troubleshooting If your phone appears following phenomenon in the process of application, please read following relative information at first. If the problems still can not be solved, please contact with the distributor or service provider. Problem Check Point When switching on the phone, it Please input your PIN Code which prompts “Enter PIN”.
Page 74
No prompt tone at alarm time. Please check relative sound setting (Alert Type and ringer Volume in Settings). Messages cannot be sent. Please check signal network.