Advertisement
17
Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+) facing outward. Screw ignitor cap onto ignitor.
LP tank is sold separately. Fill and leak check the tank (see Use & Care section) before attaching to grill and regulator.
18
Once tank has been filled and leak checked, place tank into tank hole in bottom shelf as shown. Secure tank with tank
screw at rear of bottom shelf.
See Use & Care section to perform the "Burner Flame Check" and for important safety instructions
before using.
CAUTION
Failure to install tank correctly may allow gas hose to be
damaged in operation, resulting in the risk of fire
Tank screw
22 • 463462108
–
+
.
LP Cylinder
(not included)
AA Battery
Advertisement
