Advertisement
Attach front brace to side panels using two #10-24x1/2" screws, 5mm lock washers and 5mm flat washers on each side.
3
Insert wire ends on tank exclusion shelf into bottom shelf (A). Attach with two #8-32x3/8" screws diagonally. Tighten two #8-
4
32x3/8" screws at the back of tank exclusion wire first (B). Line up the front of tank exclusion wire to holes in top brace and
secure with two #8-32x3/8" screws and #8-32 flange nuts.
#8-32 flange nut
A
#8-32x3/8" screw
#8-32x3/8" screw
Magnet
#10-24x1/2"
screws
5mm lock washers
B
5mm flat washers
463462108 • 15
Advertisement
