DeLonghi PRIMADONNA ELITE ECAM 650.85.MS Instructions For Use Manual page 26

INSERT WATER SPOUT
INSERT MILK CONTAINER
INSERT INFUSER ASSEMBLY
PUSH
WATER CIRCUIT EMPTY
PRESS OK TO START
OK
PRESS OK TO CLEAN OR TURN
DIAL
OK
The hot water spout (C6) is not inserted or is
inserted incorrectly
The milk container (D) is not inserted correctly. Insert the milk container as far as it will go (fig.
The infuser (A19) has not been replaced after
cleaning.
The water circuit is empty
The milk container has been inserted with
the froth adjustment dial (D1) in the "CLEAN"
position.
26
Insert the water spout as far as it will go.
18).
Insert the infuser as described in section "16.9
Cleaning the infuser".
Press "OK " to deliver water from the spout
(C6) until it flows out normally.
If the problem persists, make sure the water
tank (A16) is fully inserted.
To proceed with the CLEAN function press "OK
", or turn the froth adjustment dial to one of the
milk positions.