Setup (Initial Setup) - Samsung 4+ Series User Manual

Setup (Initial Setup)

When the TV is initially powered on, a sequence of on-screen
prompts will assist in configuring basic settings. Press the
POWERP button. Setup is available only when the source
is set to TV.
1. Menu Language (depending on the country):
Selecting a menu language
Press the ▲ or ▼ button, then press the ENTERE
button.
Select the desired OSD (On Screen Display) language.
2. Use Mode: Selecting Store Demo or Home Use
Press the ▲ or ▼ button, then press the ENTERE
button.
Select the Home Use mode. Store Demo mode is for
retail environments.
✎
When pressing TV controller, the function menu
screen appears. Select the MENU(m) and press it
more than 5 seconds using the controller. The Store
Demo mode is set.
✎
Cancel the Store Demo by selecting Source(
pressing it more than 5 seconds.
✎
Store Demo is only for shop display. If you select it,
several functions are not able to use. Please select
Home Use when you watch at home.
3. Area: Selecting an Area
Press the ▲ or ▼ button, then press the ENTERE
button.
Select the appropriate area.
4. Auto Tuning (Step 1): Selecting how you watch your
TV
Let's find and store channels on your TV. Do you need
to search for channels?
• Yes, I need to.: Memorises all of the available channels
using RF cable.
• No, I don't need to.: You don't need to use Auto
Tuning to find channels.
5. Auto Tuning (Step 2): Selecting a search options
Select the desired broadcasting signal. Press the
▲/▼/◄/► button, then press the ENTERE button.
When selecting Digital & Analogue, Digital and
Analogue. For more information, refer to Channel → Auto
Tuning.
✎
Press the ENTERE button at any time to interrupt
the memorisation process.
6. Clock: Setting the Clock Mode
• Auto: Set the current time automatically.
• Manual: Allows you to manually set the current date
and time.
7. Setup Complete
Press the ENTERE button.
✎
The completed settings are displayed.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN
) and
number. The default PIN number is "0-0-0-0". If you want to
change the PIN number, use the Change PIN function.
You should do Setup
although you did in shop.
✎
If you forget the PIN code, press the remote control
buttons in the following sequence in Standby mode,
which resets the PIN to "0-0-0-0":
→
POWER (on)
→ System) again at home
(MENU
→ 8 → 2 → 4
MUTE
English
7