Changing The Picture Options - Samsung 4+ Series User Manual

Basic Features

Changing the Picture Options

¦
Advanced Settings
O
MENUm → Picture → Advanced Settings →
ENTERE
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
Advanced Settings
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Colour Space
White Balance
Gamma
■
Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■
Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■
Flesh Tone: Adjust the flesh tone colour.
■
RGB Only Mode (Off / Red / Green / Blue): Displays
the Red, Green and Blue colour for making fine
adjustments to the hue and saturation.
■
Colour Space (Auto / Native): Adjust the range of
colours available to create the image.
■
White Balance: Adjust the colour temperature for a
more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour's (red,
green, blue) brightness.
Reset: Resets the White Balance to its default settings.
■
Gamma: Adjust the primary colour intensity.
14
English
Medium
Off
0
Off
Native
0
Picture Options
O
MENUm → Picture → Picture Options → ENTERE
■
Colour Tone (Cool / Standard / Warm1 / Warm2)
✎
Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
■
Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualisation): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
✎
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualisation: When changing analogue channels,
displays signal strength.
✎
Only available for analogue channels.
✎
When the INFO button is pressed, the signal
strength bar is displayed.
✎
When bar is green, you are receiving the best
possible signal.
■
MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
picture quality.
■
HDMI Black Level (Low / Normal): Selects the black
level on the screen to adjust the screen depth.
✎
Available only in HDMI mode (RGB signals).
■
Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjust the picture for optimum quality.
✎
Available in TV mode, AV, Component (480i / 1080i)
and HDMI (1080i).
✎
If the screen does not seem natural, change its
option to Off / Auto1 / Auto2 in Film Mode.
Reset Picture (Yes / No)
O
MENUm → Picture → Reset Picture → ENTERE
Resets your current picture mode to its default settings.