Changing The Preset Picture Mode - Samsung 4+ Series User Manual

Picture Menu

Changing the Preset Picture Mode

¦
O
MENUm → Picture → Picture Mode → ENTERE
Picture Mode
t
Select your preferred picture type.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Movie: Suitable for watching movies in a dark room.
Cell Light / Contrast / Brightness / Sharpness
/ Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
✎
NOTE
• In analogue TV, AV modes of the PAL system, the
Tint (G/R) function is not available.
• Settings can be adjusted and stored for each
external device connected to the TV.
• Lowering picture brightness reduces power
consumption.
Screen Adjustment
O
MENUm → Picture → Screen Adjustment →
ENTERE
Set the various picture options such as picture size and
aspect ratio.
■
Picture Size: Your cable box/satellite receiver may have
its own set of screen sizes as well. However, we highly
recommend you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the picture size to the
16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
✎
Adjusts the Position by using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
✎
Adjusts the Zoom or Position by using ▲, ▼
button.
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
■
Position: Adjust the picture position. It is only available
in Screen Fit or Wide Zoom.
■
Zoom/Position: Adjust the picture size and position. It is
only available in Zoom.
✎
NOTE
• After selecting Screen Fit in HDMI (1080i / 1080p)
or Component (1080i / 1080p) mode, you may need
to centre the picture:
1. Press the ▲ or ▼ button to select Position.
2. Press the ENTERE button.
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
• Depending on the input source, the picture size
options may vary.
• If you want to reset the position you adjusted, select
Reset in the Position screen. The picture will be set
to its default position.
• The available items may differ depending on the
selected mode.
• Settings can be adjusted and stored for each
external device connected to an input on the TV.
• If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.
■
4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3):
Available only when picture size is set to Auto Wide. You
can determine the desired picture size at the 4:3 WSS
(Wide Screen Service) size or the original size. Each
country requires different picture size.
✎
It is only available in Auto Wide.
13
English