Maintenance; Preparing The Battery Pack For Recycling; Oiling The Trimmer Blade - Toro Power Plex 51491T Operator's Manual

24in 40v max hedge trimmer
Hide thumbs Also See for Power Plex 51491T:
Table of Contents

Advertisement

Maintenance

Disconnect the product from the power supply (i.e. remove
the plug from the power supply or the battery pack) before
maintenance or cleaning work.
Use only the manufacturer's recommended replacement parts
and accessories.
Inspect and maintain the product regularly. Have the product
repaired only by an authorized service center or similar
qualified specialist.

Oiling the Trimmer Blade

Note: Oil the trimmer blade before and after each use.
1. Stop the motor and remove the battery.
2. Clean dirt and debris from the body of the hedge
trimmer, using a damp cloth with a mild detergent.
Note: Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by certain
aromatic oils, such as pine and lemon, and by solvents
such as kerosene.
3. Lay the hedge trimmer on a flat surface. Apply
light-weight machine oil along the edge of the top
blade. If you will be using the hedge trimmer for an
extended period of time, oil the blade during use.
Note: Do not oil the hedge trimmer while it is
running.
Storage
Important: Store the tool, battery pack, and battery
charger only in temperatures between -20°C (-4°F) and
70°C (158°F).
Important: Unplug the charger if you store it below
-20°C (-4°F) or above 70°C (158°F).
Important: If you are storing the tool for a prolonged
period of time, remove the battery pack. When you are
ready to use the battery pack again, charge it until the
left indicator light turns green on the charger or all 4
LED indicators turn blue on the battery.
Disconnect the product from the power supply (i.e.,
remove the plug from the power supply or the battery
pack) and check for damage after use.
Clean all foreign material from the product.
When not in use, store the tool, battery pack, and battery
charger out of the reach of children.
Keep the tool, battery pack, and battery charger away
from corrosive agents, such as garden chemicals and
de-icing salts.
Store the tool, battery pack, and battery charger in a
clean, dry area.
Preparing the Battery Pack for
Recycling
Important: Upon removal, cover the terminals of the
battery pack with heavy-duty adhesive tape. Do not
attempt to destroy or disassemble the battery pack or
remove any of its components. Recycle or properly
dispose of lithium-ion battery packs at a battery
recycling facility.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Power plex 51491

Table of Contents