Maintenance - Toro Flex-Force Power System 51855T Operator's Manual

Maintenance

After each use of the trimmer, complete the following:
1. Remove the battery pack from the trimmer
before maintaining or cleaning.
2. Wipe the trimmer clean with a damp cloth any
time there is an accumulation of debris. Do not
hose the trimmer down or submerge it in water.
WARNING
The hedge trimmer blades can cause
cuts or amputation.
Be careful when handling the hedge
trimmer with the protective cover
removed.
3. Inspect the machine, check and tighten all
fasteners. If any part is damaged or lost, repair
or replace it.
Important:
Use only the manufacturer's
recommended replacement parts and
accessories.
Have the product repaired only by an
Authorized Service Dealer.
4. Brush debris away from air intake vents and
exhaust on motor housing to prevent the motor
from overheating.
Lubricating the Blades
Service Interval: After each use
WARNING
The hedge trimmer blades can cause cuts or
amputation.
Be careful when handling the hedge trimmer
with the protective cover removed.
1. Shut off the trimmer, remove the battery pack,
and place the trimmer on a flat surface.
2. Clean dirt and debris from the hedge trimmer,
using a brush or a damp cloth with a mild
detergent.
3. Apply light weight machine oil (such as #10)
along the edge of the top blades
1. Apply machine oil to the top edge of the blades.
9
(Figure
Figure 8
1).
g426760