Table of Contents
Advertisement
Problem
No picture, there is sound.
There is no sound.
The picture is not sharp.
Remote control does not work.
Solution
1. Check to see if the video cable is
properly connected.
2. Press the "SOURCE" button from the
remote control to see if the input is
correctly selected.
1. Make sure the volume level is not set
to tne minimum.
2. Make sure the mute function is not
selected.
1. The program reception may be weak .
2. Check the "Sharpness" setting in the
OSD video menu. (Refer to page 26)
1. Check the remote control's batteries.
2. Make sure there is no device near by
the LCD TV generating interference.
3. Turn the TV off for 10 seconds and
turn it on again.
42
Advertisement
Table of Contents
