Table of Contents
Advertisement
Controlling PIP, PAP, and MAIN
1. Use the hot key "MULTI PICTURE" on your remote con-
trol. (For more information on the remote control functions,
refer to Page 13).
2. This allows you to switch among three modes.
MAIN mode
3. During PIP and PAP modes, you may use the "ACTIVE
WINDOW" on your remote control to navigate between
which window you wish to adjust (channels, volumes, OSD
video settings, and etc.).
4. To adjust the position of the PIP,
simply press "MENU" on your re-
mote control or TV controls; scroll
down to the OPTIONS menu and
press "OK". Navigate down to the
PIP POSITION on the menu and
press
to change the position.
The PIP screen will adjust itself to
a new location (goes clockwise).
(For more information on the op-
tions menu, refer to Page 33)
Note:
1. PIP/PAP Sub-screen supports TV, AV1, AV2, S1, S2 input signals only.
2. PIP/PAP will not apply to video signals from HDMI.
PIP mode
OPTIONS
COLOR TEMPERATURE
OSD TIMEOUT
MENU BACKGROUND
BLUE SCREEN
AUTO POWER OFF
BACKLIGHT
PIP POSITION
/ : TO NAVIGATE OK: TO SELECT MENU: TO EXIT
40
PAP mode
NATURE
40 SECONDS
TRANSPARENT
BLACK
OFF
UPPERLEFT
Advertisement
Table of Contents
