Table of Contents
Advertisement
Tuning to off-air programs via antenna or analog cable TV
Setting (TV)
Operation:
1. Press the "MENU" button on the remote
control to display the main OSD setup
menu as pictured below.
2. Use
to navigate the top menu bar
and select icon (
3. Use
to navigate the pull-down
menu and select "tv tuner."
4. Use
to open another pull-down
menu from "tv tuner" on the right.
5. Follow the instructions in the table
below:
).
Note: You don't have to go to the
above setup to scan channels if you
are using a Direct TV set-top -box or
digital cable set-top-box.
17
Advertisement
Table of Contents
