Connecting To Dvi Or Rgb - SOYO Dymond DYLT032A Operating Instructions Manual

Connecting to DVI or RGB

DVI
1. Connect the DVI connector on your set-top-box to the DVI-D input on the back of
your LCD TV.
2. Connect the audio cables to the RCA audio input on the back of your LCD TV.
3. Make sure you configure your set-top-box to output the video in DVI-D mode.
4. Press the "Source" button on the remote control to display the OSD setup menu and
select "DVI".
RGB
1. If you wish to connect a PC to the LCD TV, connect the 15-pin D sub RGB connector on
your PC to the RGB-in jack on the back of your LCD TV.
2. Connect the audio out jack on your PC to the RCA audio input on the back of your
LCD TV.
3. Press the "Source" button on the remote control to display the OSD set up menu and
select "RGB".
4. You may configure your PC's VGA resolution to output optimized resolution to your
LCD TV.
13