Table of Contents
Advertisement
Connecting S-video or Composite Video
This section shows you how to connect devices to your LCD TV to the S-video and
composite video inputs. Most devices like VCRs, camcorders, non-progressive scan
DVD players, etc; only provide composite video output or S-video output. The steps
below are to show you how to connect two devices simultaneously.
1. Connect the S-video on the back of your camcorder to the S-video under AV2 Input
jack.
2. Connect the audio red (R) and white (L) on the back of camcorder to the audio red (R)
and white (L) jacks on the back of your LCD TV.
3. Connect the yellow video jack on the back of your VCR to the yellow composite
video input jack on the back of your LCD TV under AV1 Input.
4. Connect the red (R) and white (L) audio jacks on the back of your VCR to the second-
ary audio red and white (L) jacks on the back of your LCD TV.
5. Press the "Source" button on the remote control to display the OSD setup menu and
choose "AV 1" to display video from the VCR or choose "AV2" to display video from
the camcorder.
12
Advertisement
Table of Contents
