Operations
Control panel
01 Course Selector
02 Display
03 Temp.
04 Rinse
05 Spin
06 Dry Level
07 Bubble Soak
08 Options
WD80J5410AW_03588T-02_EN.indd 31
02
01
Turn the dial to select a course.
The display shows current course information and estimated time
remaining, or an information code when a problem occurs.
Press to change the water temperature for the current course.
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5.
Press to change the spinning speed for the current course.
• Rinse Hold (No indicator): The final rinse cycle is suspended so
that the laundry remains in the water. To unload the laundry, run
a drain or spin cycle.
• No Spin
: The drum does not spin after the final drain cycle.
Press this button to select proper drying option.
Press to activate/deactivate the Bubble Soak function. This function
helps remove a wide variety of stubborn stains.
Press to select an option from Intensive, Prewash, and
Intensive+Prewash. Press again to deselect.
03
04
05
06
09
11
08
10
07
English 31
2016/4/6 10:21:27