–
Check the chain sliding guard for wear.
»
If screw
ing guard when viewed from above:
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
»
If the chain sliding guard is loose:
–
Tighten the screw of the chain sliding guard.
Guideline
Screw, chain
guard
F00752-10
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 113)
SERVICE WORK ON THE CHASSIS 12
1
C
becomes visible in area
M5
7 Nm (5.2 lbf ft)
of the chain slid-
Loctite
243™
®
129