Five Channel Inputs And Controls - Soundstream Tarantula TRA1000.2 Owner's Manual And Installation Manual

17
4 OHM MAX
BASS
FRONT PANEL LAYOUT

FIVE CHANNEL INPUTS AND CONTROLS

RCA Output:
Provides a full range signal output to drive other amplifier
RCA Input:
Input from the source unit.
Input modes:
Allows selection between 0.2-4V/4.2-8V.
Gain Adjust:
Used to adjust gain to match source unit.
Bass Boost:
Adjust this control for 0 to +12dB of bass boost
High Pass/BP filter(HPF or BP x-over)
Low Pass/BP filter(LPF or BP x-over)
Note:Push both switches IN for BP Crossover Function.
Speakers:
Left and right speaker connections.Use Left Positive(+) and
Right Negative(-) for bridged output.
FUSE:
Never replace with a fuse greater than specified.
Power:
Connect heavy(8 gauge minimum) stranded wire to the 12 volt
and grounded source.Connect the ground to the chassis near
the amplifier.
Power LED:
Green:Power on
Red:Protection mode
18