Tools, Supplies, And Required Equipment - Traxxas RUSTLER 4X4 BRUSHLESS Owner's Manual

TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT

Your model comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate and
maintain your model.
SUPPLIED TOOLS AND EQUIPMENT
2.5mm "L" wrench 2.0mm "L" wrench
REQUIRED EQUIPMENT
6 or 7-cell NiMH battery pack, or
2s battery pack, with Traxxas
High-Current Connector*
REMOVING AND INSTALLING THE BODY
Your Rustler 4X4 Brushless includes an innovative latching system
for securing the body to the chassis. To remove the body for chassis
access:
1. Turn the handle 90 degrees counterclockwise to unlock the
body latch.
2. Open the latch to release the truck body from the rear shock
tower.
3. Slide the body backward away from the front shock tower to
release the front body tab. Note: The body latch must clear the
rear shock tower.
4. Gently lift the body straight up from the chassis. Lift the front
and rear of the body evenly or it may become difficult to
remove. (Installation of the body is the reverse of removal.)
5. Practice this a few times until you become familiar with the
latching mechanism. The more you do it, the faster you will be.
1.5mm "L" wrench
(sold separately)
™
EZ-Peak Dual
(Part #2972)
Battery charger* 4 AA alkaline batteries
www.modellmarkt24.ch
4-way wrench 8mm/4mm wrench
*Battery and charger style are subject to change and may vary from images.
For more information on
batteries, see Use the Right
Batteries on page 13.
Recommended Equipment
These items are not required
Preload spacers and
shock pistons
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
Glue, part #6468 (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
RUSTLER 4X4 • 7