Configure The Way Of Receiving Logs - TP-Link Omada EAP615 User Manual

Configure the Way of Receiving Logs

In the Log Settings section, you can configure the ways of receiving system logs.
Follow the steps below to configure this feature:
1. Check the corresponding box to enable one or more ways of receiving system logs,
and configure the related parameters. Two ways are available:
■ Auto Mail
If Auto Mail is configured, system logs will be sent to a specified mailbox. Check the box
to enable the feature and configure the related parameters.
Note:

SSL encryption is not currently supported.
The following table introduces how to configure these parameters:
From
To
SMTP Server
Enable
Authentication
Enter the sender's E-mail address.
Enter the receiver's E-mail address.
Enter the IP address of the sender's SMTP server.
Note: At present, the domain name of SMTP server is not supported in
this field.
If the sender's mailbox is configured with You can check the box to
enable mail server authentication. Enter the sender's username and
password.
82
Auto Mail and Server .