TP-Link Omada EAP615 User Manual page 79

MAC Address Displays the MAC address of the user.
Band Displays the frequency band the user is working on.
SSID Displays the SSID the user is connecting to.
Active Time Displays how long the user has been connected to the SSID.
Up (Byte) Displays the user's total uploaded traffic to the EAP since the last
connection.
Down (Byte) Displays the user's total downloaded traffic from the EAP since the last
connection.
RSSI (dBm) Displays the RSSI(Received Signal Strength Indication) of the user.
Rate (Mbps) Displays the wireless transmission rate of the user.
You can execute the corresponding operation to the EAP by clicking an icon in the Action
column.
Click the icon to configure the rate limit of the client to balance
bandwidth usage. Enter the download limit and upload limit and click
OK.
You can limit the download and upload rate for each clients by which
connect to specific SSIDs when configuring SSIDs, refer to
Configure SSIDs
to get more details.
Note that the download and upload rate will be limited to the smaller
value if you set the limit value both in SSID and client configuration.
Click the icon to block the access of the client to the network.
75
2.1.1