Bosch Professional GBM 13 RE Original Instructions Manual page 7

OBJ_BUCH-805-004.book Page 7 Tuesday, February 4, 2014 10:37 AM
Safety Warnings for Drills
 Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
 Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting ac-
cessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an
electric shock.
 Use appropriate detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage.
 Switch off the power tool immediately when the tool in-
sert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when
the cable is damaged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for drilling in wood, metal, ceramic
and plastic. Machines with electronic control and right and
left rotation are also suitable for screwdriving and tapping.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
Bosch Power Tools
1 Key type drill chuck
2 Belt clip
3 Handle (insulated gripping surface)
4 Lock-on button for On/Off switch
5 On/Off switch
6 Rotational direction switch (GBM 13 RE)
7 Chuck key
8 Screwdriver bit*
9 Universal bit holder*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Rotary drill
Professional
Article number 3 601 D77 0.. 3 601 D77 5..
Rated power input W
Output power W
-1
No-load speed min
-1
Rated speed min
Rated torque Nm
Spindle collar dia. mm
Speed control
Right/left rotation
Max. drilling dia.
– Steel mm
– Wood mm
– Aluminium mm
Chuck clamping
range mm
Weight according to
EPTA-Procedure
01/2003 kg
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Assembly
Changing the Tool
 Before any work on the machine itself, pull the mains
plug.
 Wear protective gloves when changing the tool. The drill
chuck can become very hot during longer work periods.
Key Type Drill Chuck (see figure A)
Open the key type drill chuck 1 by turning until the tool can be
inserted. Insert the tool.
Insert the chuck key 7 into the corresponding holes of the key
type drill chuck 1 and clamp the tool uniformly.
English | 7
GBM 13 GBM 13 RE
Professional
600 600
360 360
2600 0 – 2600
1676 1676
20 20
43 43

–

–
13 13
30 30
13 13
1.5 – 13 1.5 – 13
1.7 1.7
/II /II
1 619 P11 532 | (4.2.14)