Table of Contents
Advertisement
6.
Safe Boot button (SAFE_BOOT)
The Safe Boot button can be pressed anytime to force the system to reboot into the
BIOS safe mode. This button temporarily applies safe settings to the BIOS while
retaining any overclocked settings allowing you to modify the settings causing boot
failure. Use this button when overclocking or tweaking the settings of your system.
7.
SLI/CFX switch (SLI/CFX)
This switch allows you to determine the slots for 2-WAY or 3-WAY graphics card
installation. When enabled, the PCIE LEDs near the slots light up, telling you to install
the graphics cards to the specific slots.
•
•
1-12
The LEDs below the SLI/CFX switch and near the PCIE slots light up when the SLI/
CFX switch is enabled. Refer to section 1.1.7 Onboard LEDs for the exact location of
the SLI/CFX and PCIE LEDs.
After adjusting PCIE bandwidth in the BIOS, shut down the system for the PCIE LEDs
to update the lighting effect.
Chapter 1: Product Introduction
Advertisement
Table of Contents
