Lnstallation Steps - Kamada power KMDPJ24100 User Manual

7
Wall Mount Bracket
8
Expansion screws
Output negative power
9
cable
Output positive power
10
cable
Communication line
11
between inverter and
battery

3.3.2 lnstallation steps

Assembly and
commissioning
step number
step 1 Assemble casters
Assembled battery back
step 2
lugs
step 3 Assembling wall brackets c.Screw expansion screws to the load-bearing wall
step 4 Wall Mount Battery
Pair plugging positive and
step 5
negative power cables
Docking inverter and
step 6 battery communication
cable
Dial the ADD address
step 7
switch
step 8 turn on the switch
Corresponding wall brackets are equipped according to different battery
specifications
Outer hexagon expansion screw GB/T5285-1985-M10X80-8.8
According to different battery specifications and customer needs, match
the corresponding output negative power line
According to different battery specifications and customer needs, match
the corresponding output positive power line
According to different inverters and customer needs, the corresponding
communication network cable is equipped.
If the customer does not inform the inverter of the detailed information,
we will not provide this communication network cable.
Name
a.Lock the casters to the bottom of the battery with screws
b.Lock the wall hook to the back of the battery with screws
d.Hang the battery on the wall mount
e.Insert the positive and negative power cord pairs
between the battery and the inverter
f.According to the communication protocol port of the
inverter, one end of the communication line between the
inverter and the battery is plugged into the CAN or RS485
port of the battery, and the other end is plugged into the
inverter.
g.If it is only one battery, please dial 1, and the rules of
other dialing addresses are detailed in 4.4
h.Press the power switch on the side to let the ON/OFF
RUN 6 battery indicator lights display in green
13
Assembly Instructions