Table of Contents
Advertisement
Connecting the PC
„ Setting the IP Address in the PC
Note
z If the IP address has already been set in the PC or is
1
acquired automatically, go to
the Device Using the Control Panel"
1
Turn ON the PC power supply to start
Windows.
2
Click [Start], and select [Windows
2
System] > [Control panel].
3
Click [View network status and tasks].
3
4
4
Click [Ethernet], and then click
[Properties] in the "Ethernet" window.
"Setting the IP Address in
(P.59).
5
Select [Internet Protocol Version 4 (TCP/
IPv4)], and click [Properties].
6
Enter the IP address, Subnet mask,
Default gateway, and DNS server, and
click [OK].
Memo
z If acquiring the IP address from the DHCP server
automatically, select "Obtain an IP address
automatically", and do not enter an IP address.
z Do not enter if not using a Default gateway or DNS
server.
7
Close the "Local Area Connection
Properties" window.
- 62 -
Advertisement
Table of Contents
