Table of Contents
Advertisement
7
Close the access cover.
8
Tighten the access cover screws.
9
Connect the cables, and turn ON the
device power supply.
10
Check that the standby screen is
displayed in the liquid crystal panel.
11
Print the "Configuration".
Press either the scroll button
on the control panel to display the
"Functions" screen.
Memo
z Print the "Configuration" on A4 size paper. Set A4
size paper in the paper feed tray.
12
Press the scroll button
Information], and then press the [OK]
button.
13
When the [Configuration] have been
selected, press the [OK] button.
14
When [Execute] has been selected,
press the [OK] button.
15
Check that the HDD has been added to
the "Configuration".
Reference
"Printer Information" (P.54)
z
- 49 -
Installing the Device
or
1
2
to select [Print
3
4
Advertisement
Table of Contents
