Mitsubishi Electric PLA-ZRP35BAR1.UK Service Manual page 35

10-1-2. How to perform the up/down operation using wireless remote controller
1) Ensure that the air-conditioner is not running.
2) Press the "Down" button to lower the air intake grille.
By default, the air intake grille will automatically stop at a lowering distance of 1.6 m from the ceiling level.
The distance can be changed to 1.2 m, 2.0 m, 2.4 m, 2.8 m, 3.2 m, 3.6 m and 4.0 m. These should be used
only as a guide. You should lower the air intake grille yourself to check the exact distance.
When you want to stop the air intake grille while it is lowering, press the "Stop" or "Up" button on the remote
controller to stop at that position.
3) Remove the filter or air intake grille and clean them.
4) Attach the filter and air intake grille.
5) Press the "Up" button on the remote controller to put the air intake grille in place.
If the air intake grille is not placed in the correct position at a time, the operation is automatically retried.
When you want to stop the air intake grille while it is rising, press the "Stop" or "Down" button on the remote controller
to stop at that position.
10-1-3. How to perform the up/down operation using wired remote controller (PAR-30MAA / PAR-31MAA)
Select "Maintenance" from the Main menu, and press the
1
Select "Auto descending panel" with the F1 or F2 button, and press the
button.
Note: When using the auto descending panel, always set the "Address" and "Unit
No." with "Service" – "Function setting".
Move the cursor to "Ref. address", "Unit No." or "Operation" with the F1
2
button to select.
Select the refrigerant address and the unit number for the units to lower the
panel, with the F2 or F3 button, and press the
• Ref. address: Refrigerant address
• Unit No.: 1, 2, 3, 4, All
• Operation: Down / Up
Press the F4 button to confirm the unit.
<Confirmation of target unit>
If the unit being set is unknown, make the setting and then press the F4 but-
ton to confirm.
The air conditioner which is blowing downward is the target air conditioner.
Navigating through the screens
• To go back to the Main menu ..................
• To return to the previous screen ...............
OCH535A
Ensure that the air-conditioner is not running.
Warning:
• Otherwise, it may cause an injury or a failure.
button.
button.
button
button
35 35
Wireless remote
controller for
Automatic Filter
Elevation Panel
Maintenance menu
Auto descending panel
Manual vane angle
Main menu:
Cursor
F1 F2 F3 F4
Auto descending panel
Ref. address
Unit No.
All
Operation Down / Up
Keep clear, panel descending.
Press Check for Unit No.
Action:
Cur. Address Check
F1 F2 F3 F4
Auto descending panel
Ref. address
Unit No. All
Operation
Down / Up
Panel will stop in 30 sec.
Keep clear, panel descending.
F1 F2 F3 F4